QuantiCSP is a 100% solid polyurea with a silicone tail. This enables the polyurea to have superior chemical and heat resistance, lower water absorption, better abrasion resistance and improved weathering. Although aromatic the silicone tail reduces oxidation when exposed to direct sun light. Light colors will still change but gloss remains. QuantiCSP will have lower algae build-up and reduced marine growth compared to regular polyurea. QuantiCSP performs well when exposed to petroleum products such as gasoline with or without ethanol, diesel fuel with or without biofuel added and crude. Conventional polyurea is attacked by ethanols. QuantiCSP requires heated plural spray equipment such as Graco EXP­2 using hose heats of 150 – 160F and primary heats the same. Spray pressures using Graco P2 or Fusion gun are to be set at 2000psi. Surface preparation should be the same as regular polyurea that is clean, dry and abraded. QuantiCSP can be available in different hardness from 65 Shore D to 80 Shore A. Tensile-strength and elongation will vary with hardness.