WBE2 is a clear or pigmented 2- component water based aliphatic epoxy formulation with excellent chemical and UV resistance. WBE2 has great adhesion to most substrates such as concrete, metals and asphalt. There is no  odor

or vocs  allowing it to use for inside applications. It is available with  50% nano size glass filler ,anti static , anti-microbial, and anti-corrosive additives. WBE2 can  be used as a primer and can be diluted with  25% water to penetrate porous concrete. WBE2 dries to a high  gloss top coat . The glass filled dries to a matte finish with a nonskid finish.

​

WBE2 dries very fast depending on  temperature

, humidity and thickness. Typical drying times are 15 minutes with  up  to 8 hour pot life. WBE2 may be sprayed, brushed or rolled. Rolling should be done with  a short knap roller. Typical

use temperatures are between 25-150F . Full cure should be 24 hours.

​

Please contact our technical support group for specific substrate application procedures, equipment, safety gear and clean-up kits. Refer to SDS for material and safety standard procedures.